Tips To Find An Acura Car

Tips To Find An Acura Car

What steps should you take to find the right Acura car for you to buy? I personally don’t enjoy shopping for cars, but it is a necessity if you want to avoid riding the bus for the rest of your life. There are steps you can take to find the car you want at the right price and get it done efficiently. If you decide that you think an Acura car of some sort will be best for you then follow these tips and you can be driving off in your Acura car before you know it.

The first thing you probably should figure out is which model of Acura car you want to buy. Acura cars are offered in a wide variety of models from luxury sedans to sports cars, to SUV models. Do some research and look up the various Acura car models and price ranges so that you will know exactly what you are looking for when you start your search.

Second, get online and do some research on the Acura car you have selected. First, check out the consumer sites and reviews that are available all over the internet. Find out what the positives and negatives are. More importantly, perhaps, than that is to find out about what the right price to pay for one is. If you are considering a used Acura car find out what mileages and years fit your budget the best. If you think you are going to want to buy a new Acura car, then find out what the suggested price is versus the prices most people end up getting after they talk the dealer down a little bit. If you have a trade in you are going to use toward your Acura car, you may want to go ahead and check the value of that as well so you can make sure you get fair compensation.

Once you have checked out and researched online, you need to start heading out to the dealerships. You may want to find out, first, what Acura cars they have by checking the individual dealer websites. Often they have their inventory on there and some starting prices so you will know what you are looking for when you arrive. Many people are intimidated by sales people, but this education and arming of yourself with knowledge should alleviate some of your concerns since you will know what you should pay and what you should get for a trade it.

Get pdf Tips To Find An Acura Car

2004-2005 Acura TSX Figure Grille Set Installation Manual

2004-2005 Acura TSX Figure Grille Set Installation Manual

Acura TSX Figure Grille Installation
1) PREPARATION
1.1) Remove the OEM fog light grilles, if this item was purchased. The stock fog light opening covers are held in place with spring clips attached to the cover. Work a finger between the cover and the bumper, and pull outward to release the cover.
1.2) The lower center grille is not removable; it is bonded to the bumper, and it will be left in place.
1.3) Loosen the underbody. In order to gain access to the back of the grille later in the installation process, remove the three pop-top fasteners and two bolts shown in Fig. 1. DO NOT remove the bolts with the circle and bar symbols. Refer to Fig. 2 for the pop-top removal procedure.
1.4) Black out the fog light openings (optional.) On vehicles with lighter paints, it may be desirable to black out the fog light openings, as shown in Fig. 1, so the light paint does not show through and detract from the new grilles. If you choose this option, the blacked out portion of the bumper WILL NOT affect the appearance of the vehicle should you or another owner ever decide to reinstall the stock fog light opening covers or to install fog lights. Visit www.FigureLLC.com for the full procedure.

Get pdf 2004-2005 Acura TSX Figure Grille Set Installation Manual

CamGears Honda Installation Guide

CamGears Honda Installation Guide

This installation guide should be used in conjunction with a authorized Honda / Acura factory service manual and the installation should be performed by a trained automotive technician.

‘Supplied Hardware:
Timing Gear Pulley - 2
Camshaft Key (OEM Honda) - 2
SS 1/4-28 SHCS-12

Tools Required:
Automotive Tool Set (Metric) -1
Allen Wrench Set (Standard) -1

1. Carefully removed stock timing belt according to instructions in factory manual. Rotate crankshaft to TDC position and remove stock timing gears and camshaft keys. Completely remove stock timing gear dust guard behind the gears (do not reinstall).
2. Install new factory OEM keys on to the camshafts. Slide the timing gear disc in alignment with the camshaft keys, completely on to shafts, install and torque the pulley bolt aid washer to the end of the shaft, to factory specifications. See Assembly Clawing.
3. Race timing gear pulleys on to timing gear disc and align the key way center mark on the timing gear disc with the zero mark on the timing gear pulley. Fas- ten the gear pulley to the gear disc with the 12 -1/4 SHCS and washers (six on each timing gear). Torque the SHCS evenly. See Figure 1.0
4. Align the TDC marks between the exhaust and intake timing gears and insure the “UP” arrow is faring upwards. See Figure 1.0
5. Install the timing belt tightly in the sequence shown in Figure 2.0. (1)-timing belt drive pulley (crankshaft) to (2) - Adjustment pulley to (3) - Water pump pulley to (4) - Intake camshaft pulley to (5) - Exhaust camshaft pulley.
6. Loosen and retighten the adjusting bolt to tension the belt. Rotate the crank-shaft about 3 to 5 turns counterclockwise so that the belt positions on the pulleys.
7. Check the crankshaft pulley and the camshaft pulleys are at TDC position (See Figures 1.0 & 3.0)
8. If a camshaft pulley is not positioned at TDC, remove the timing belt and adjust the positoning. Insure TDC postioning of camshaft and crank pulleys and reinstall the timing belt. Adjust the timing belt tension according to factory specifications.
9.0 Torque the SHCS securing the timing gear pulley to the timing gear disc evenly. (SHCS must be torqued equally to insure non-slip operation)
10.0 Start vehicle in stock timing adjustment mode (zero adjustment) to insure proper operation of vehicle. To adjust power curve, be sure to baseline the vehicle at no adjustment. Loosen SHCS and make adjustment- Re-torque SHCS. Test vehicle at different timing mark adjustments at a proper vehicle testing facility.

Get pdf CamGears Honda Installation Guide

ACDC01 AC Line Kit for Acura Integra DC 94-01

ACDC01 AC Line Kit for Acura Integra DC 94-01

Below you will find instructions on how to install your AC Line kit for the Acura Integra DC 94-01 Chassis.
*AC Kit may not be legal for highway use. Hybrid Racing is not responsible for any direct or indirect, actual or incidental expense attributed to the use of any performance parts sold by Hybrid Racing LLC. Purchasers agree to all of the terms of this agreement upon the purchase of parts.

More information can be found at www.hybrid-racing.com.
PACKAGE CONTENTS: 4 AC Line’s, Relay, and Install Guide.
PARTS NEEDED: Stock DC evaporator and the 2 hard lines that attach to it as well as the stock DC condenser.
TOOLS NEEDED: Basic hand tools for installation of lines and Cut of wheel for removal of small stud and clearance on battery tray.
RECOMMENDED TOOLS: Soldering iron, solder and heat shrink.

1. Begin by removing the battery and battery tray as well as any stock AC lines that are attached to the firewall.
2. Underneath the battery tray there will be a stud that will need to be removed. You will know what stud to remove as it sits in the way of the AC line. If you do not remove the stud it will puncture the AC line.
3. On the back of the battery tray you will need to remove a small amount of material to clear the top of the AC line. This can be done with a small grinder.
4. You can now install both lines with the LABEL FIREWALL using the stock AC bolts. Make sure that the “O” rings are on the lines otherwise you will have a leak. The “O” Rings are delicate so be very careful when installing the lines, this can not be stressed enough.
5. Run one end of the newly installed AC lines into the AC compressor. It will only fit one way and is LABELD COMPRESSOR. Make sure that the “O” rings are on the lines otherwise you will have a leak. The “O” Rings are delicate so be very careful when installing the lines.
6. The other AC line will have the LABEL LINE A on the end. Locate the all aluminum hard-line also with the LABEL LINE A. Connect both Lines with the LABEL LINE A Together. The aluminum line can be manipulated to fit your chassis, make sure to not over bend the line.

Get pdf ACDC01 AC Line Kit for Acura Integra DC 94-01