Acura RL Rear Camera System Owner’s Manual

Acura RL Rear Camera System Owner’s Manual

Please read this Owner’s Manual carefully before using the rear camera, and keep this manual in the glove box for future reference. This product is designed to be used exclusively on an Acura RL. Acura is not responsible if the unit is used for any other intended purpose.

Advice
• Do not disassemble or modify this rear camera system. It can cause malfunction of the system.
• The camera of this system is structured as the drip-proof sealed type for prevention of dew condensation on the lens. Do not loosen the screws on the camera and do not disassemble the camera, either. It can deteriorate the drip-proof performance of the system resulting in failure of the system.
• Do not hang down the camera with the cable and do not pull the cable to move the camera, either. It can deteriorate the drip-proof performance of the system and it can cause open circuit in the cable that lead to malfunction of the system.
• Do not install the rear camera system near the antenna of radio system. Install at least 2 ft (60 cm) away from the antenna. Bands appear across the monitor screen aslant when the electric wave of the radio system jumps into the cable of the rear camera system.
• Fogged or dirty lens does not assure of the clear pictures. Remove the drops of water, snow, mud, etc. from the lens with a moist soft cloth. Do not rub the lens with a dry cloth with force as it will scratch the lens.
• When you are obliged to warm up the rear camera system with hot water, apply hot water to the camera system slowly. Avoid sharp change of the temperature of the camera. It can damage the rear camera system.

Get pdf Acura RL Rear Camera System Owner’s Manual

2002 Towing Guide

For 2002 there are even more new models, not to mention a multitude of new technologies sure to find favor with RVers. To help simplify things, we have combined some columns, such as conventional/fifth-wheel tow ratings and manual/automatic tow ratings. This not only helps shorten the guide, it makes it easier for you to make direct comparisons between truck/trailer setups with respect to their maximum tow capacities. In addition, you’ll note that we have excluded passenger car tow ratings from this year’s list (since precious few are rated to tow more than 2,000 pounds), as well as some less-popular vehicle models.

These vehicles will be included in the complete TL tow rating booklet, available separately. And as usual, vehicles capable of towing under 2,000 pounds will be excluded from both guides. Every effort has been made to ensure the accuracy of all ratings, but because our information is often preliminary at the time of publication, some numbers may have changed by the time you visit your dealer’s showroom. When in doubt, consult the manufacturer’s towing guide (available at your dealership) or the vehicle owner’s manual to be certain.

Get pdf 2002 Towing Guide

2002 Towing Guide

Time-Based Progressive Nitrous Controller Installation Instructions

Time-Based Progressive Nitrous Controller Installation Instructions

Your NOS Progressive Nitrous Oxide Injection Controller is designed to provide you with an ability to “adjust” the rate at which power from your nitrous oxide injection kit is applied to your vehicle. This controller is capable of operating any NOS nitrous system that features the nitrous and fuel solenoids with a maximum combined current draw of 40 amps, not including safety solenoids. Note that the highest current draw of any standard single stage NOS system is approximately 23-30 amps (NOS Pro Fogger P/N 02462NOS).

Initial power (solenoid duty cycle) is adjustable from 0-100%. The rate at which the solenoid duty cycle is increased (power increased) is adjustable from 0-10 seconds. Maximum power is adjusted through jetting changes, similar to a conventional nitrous oxide injection system.

The time-based progressive nitrous controller is applicable to a variety of vehicles using the NOS nitrous oxide injection kits. The basic controller and operating principle is the same for your vehicle regardless of whether it is carbureted or equipped with electronic fuel injection. However, the mounting hardware necessary for a safe installation varies with application. Listed below are the three types of nitrous oxide injection kits produced by NOS, and the application kits necessary for a proper installation.

Get pdf Time-Based Progressive Nitrous Controller Installation Instructions

1990-1993 Acura Integra TWM Performance Short Throw Shifter Installation Manual

1990-1993 Acura Integra TWM Performance Short Throw Shifter Installation Manual

1. Unscrew the stock shift knob by rotating it counter clockwise.
2. Remove all screws securing center console and remove console.
3. Remove the rubber dust boot surrounding the shifter, use caution not to damage it. Put it in a safe place for re-installation later.
4. Place the car up on a lift, or use a jack and jack stands to raise it off the ground. Loosen the nut on the base of the shifter using a 12mm socket and ratchet. You may need to hold the head of the bolt on the opposite side of the shift rod with a wrench to loosen the nut.
5. Remove the bolt from the base of the shifter and lower the shift rod that connected it to the shifter.
6. Remove both bolts securing the shift assembly to the under side of the chassis with a 12mm socket and ratchet.
7. Remove the bolt at the transmission end of the shift rod with a 12mm or 14mm (depending on model) socket and ratchet. It may be necessary to use a 12mm or 14mm wrench if space is limited.

Get pdf 1990-1993 Acura Integra TWM Performance Short Throw Shifter Installation Manual