Custom Search

1966-87 Chevrolet & GMC Header Code Number: 003 Installation Instructions

1966-87 Chevrolet & GMC Header Code Number: 003 Installation Instructions

Fits all models with standard and automatic transmissions, power brakes, power steering, air conditioning and transmission safety locks.

1. Prepare the truck for installation.
a. Disconnect the negative cable on the battery.
b. Remove the spark plugs and spark plug shields.
c. Remove the smog manifolds if equipped with a smog air pump.
d. If the generator or alternator is mounted on the left side exhaust manifold, remove the cap screws and move the unit out of the way. It is not necessary to disconnect the wires. If the alternator is mounted to the front of the engine on the right side, it does not have to be removed.
e. If equipped with air conditioning, dismount the compressor but do not disconnect the lines.
f. If equipped with power steering, loosen the tension adjustment nut.
g. Remove the dipstick and dipstick tube if necessary.
h. Jack the truck up at least 24″ and place solid supports under the frame, front and rear.
i. Remove the exhaust manifolds and exhaust pipes.
j. Remove the starter if necessary.

2. Check the condition of the motor mounts.
It is recommended that new motor mounts be installed before installing Headers.
3. Install the left side Header from below.
a. Hold the Header and gasket in position and install the front and rear Header Bolts. Do not tighten.
b. Install the balance of the Header Bolts. Do not tighten.
c. If the generator or alternator was mounted on the left manifold, remove the two front Header Bolts and install the mounting bracket.
d. If equipped with power steering, use one of the original manifolds bolts and cut a piece of spacer material to exact size and install as described below.

Get pdf 1966-87 Chevrolet & GMC Header Code Number: 003 Installation Instructions

Extended Capacity Replacement Tank for Diesel Chevrolet / GMC Trucks

Extended Capacity Replacement Tank for Diesel Chevrolet / GMC Trucks

For Chevrolet / GMC models 2500 & 3500, model years 2001-2008, with Duramax diesel engines: Extended Cab Short and Long Bed: also Crew Cab Short and Long Bed.
Note: Each tank has the above identification designation on its top. Please check to be sure the tank is properly identified as the one to fit your truck.

The following parts (Sending Unit Mounting Assy) should already be installed on the tank (top flange and 5/16” nylon locking nuts should be loosely installed).
1 ea. Sending Unit Mounting Assembly, made of:
2 ea. ½ flanges with 5/16 welded studs (mounted inside tank)
1 ea. Flat flange gasket (mounted inside tank)
8 ea. 5/16” flat retainers
1 ea. “O” Ring sending unit gasket (primary “O” ring gasket)
1 ea. Top sending unit flange
8 ea. 5/16” nylon locking nuts
2 ea. Roll-over vent valves (installed in top of tank)
2 ea. Roll-over vent valve gaskets (under roll-over vent valves)
2 ea. ½” X 36” vent hoses
6 ea. ½” hose clamps
2 ea. ½” “Y” connectors
1 ea. Rear cradle bracket
2 ea. Adhesive Backed Rubber Bushings (IF Titan Shield was ordered, only one [1] rubber bushing will be included)
1 ea. Front Cross Member assembly, including:
1 ea. tapered right-hand side bracket
4 ea. 5/16” X 1” plated bolts
4 ea. 3/8” plated flat washers
2 ea. 5/16” nylon locking nuts

Get pdf Extended Capacity Replacement Tank for Diesel Chevrolet / GMC Trucks

TRuck/SuV Radio AM/FM Stereo with Six-Disc CD Changer Installation

TRuck/SuV Radio AM/FM Stereo with Six-Disc CD Changer Installation

RaDIo FuncTIonS:
• How to get to the XM band
– Select XM1 or XM2 with the BAND button
• Tuning in XM channels
– Scroll through XM channels with the TUNE knob
– When you change channels, the radio will display the Channel Number/Name, then revert to the default display
– Press SEEK/SCAN once to select the next channel, or press and hold for 2 seconds (one beep) to scan through all channels; SC will be displayed. Press and hold for 4 seconds (double beep) to scan through all preset channels; PRESET SCAN will be displayed
• How to preset your favorite channels
– Select preset channels 1 through 6 for bands XM1 and XM2; a total of 12 presets
– Set a preset channel by pressing and holding the button until it beeps
• How to display Song Title and artist Name
– Press the RCL button to show Song Title/Artist Name/Category/Channel Name information
– Multiple presses will advance through this information
– Press and hold this button to set desired information as the default display, e.g., Artist Name
• channel category search
– Press the P-TYPE button and P-TYPE will appear on the display
– Scroll through categories with the TUNE knob
– Press the SEEK/SCAN button to select the first channel of the displayed category
– Press SEEK/SCAN again to select the next channel of the displayed category
– Once the desired category is displayed, press and hold the SEEK/SCAN button, and the radio will begin scanning within your chosen category.

Get pdf TRuck/SuV Radio AM/FM Stereo with Six-Disc CD Changer Installation

Ford F-150 Bed Extender Bracket Installation

Ford F-150 Bed Extender Bracket Installation

F-150 QUICK LATCH MOUNTING BRACKET INSTRUCTIONS
Step 1. Remove contents from box and check for damage. Verify all parts against parts list. Read and understand instructions completely before installation.
Step 2. Assemble brackets as shown in Figure 1.
Step 3. With lever towards the tailgate side insert lower hold-down bracket through lower hole on d-pillar.
Step 4. Insert upper hold-down bracket in upper hole of d-pillar.
Step 5. Tighten bolts until approximately ½ of thread is left.
Step 6. Center tabs on upper hold-down bracket in hole on d-pillar and tighten bolt while pulling outward to hold tabs in place.
Step 7. Repeat for lower mounting bracket.
Step 8. Check for interference with tailgate closed (Lever should be within 1/8 to 3/8 of tailgate).
Step 9. Torque bolts to 90 in-lbs (7.5 ft-lbs).
Step 10. Repeat steps 3-9 for other side.
Step 11. Slide Bed Extender into brackets until it locks into place.
Step 12. To remove extender either pull lever and pull upward on extender or rotate the extender 90° and then pull up on extender.

Get pdf Ford F-150 Bed Extender Bracket Installation

Related Posts with Thumbnails