Tips for Honda CBR 600 F4I/RR Flushmount signal installation

Tips for Honda CBR 600 F4I/RR Flushmount signal installation

In order to remover the factory turn signals and install ours, you will need to remove the entire upper fairing. 2.) Remove the original turn signals from the upper fairing. You can cut the connector off the factory turn signals and splice it into the G.C. turn signals. Simply place the G.C. signals into the spot on the fairing left vacant by the factory signals. The wires will go through the large hole in the fairing and the screw will attach through the small hole.

Download pdf (1 page only) Tips for Honda CBR 600 F4I/RR Flushmount signal installation