3″ Body Lift Kit Ford F-150, F-250 LD 2WD & 4WD
1. Remove negative battery cable, then positive battery cable from the battery. If equipped, the Supplemental Restraint System will be deactivated when the battery is disconnected.
STEERING
2. Lock the steering wheel.
3. Located under the dash, remove the bolt that connects the steering shaft universal joint to the steering column and separate the steering shaft from the steering column.
4. Install the steering extension on the steering column (It only goes on one way).
5. Install the Allen head bolt in the extension. Make sure the bolt goes through the retaining groove on the steering column. Tighten the Allen head bolt securely. The extension will be attached to the steering shaft after lifting operation is complete.
INTERIOR REMOVAL
6. Remove the doorjamb scuff plates by pulling up on them to release the retaining clips. Pull the kick panels back toward the door to release them from the retaining clips.
7. Pull the carpet back to gain access to the front cab mounting bolts (Fig. 1). The bolt head is located under the rubber cap. Pull on the cap to remove.
Get pdf 3″ Body Lift Kit Ford F-150, F-250 LD 2WD & 4WD
