Ford SuperDuty 3″ Body Lift Kit Installation Instructions
1. Remove the negative battery cable first, then the positive battery cable. If equipped, the Supplemental Restraint System will be deactivated when the battery is disconnected.
2. Measure and record the space between the bumpers and the body as well as the space between the cab and bed for reference during installation of this kit.
FRONT INSTALLATION INTERIOR REMOVAL 4-wheel drive models:
3. Remove the shift boot from the floorboard, if equipped with manual transfer case. Remove the four screws that mount the shift boot to the floor. Pull the boot up out of the way (It will not slip over the shift knob).
4. Remove the inner shift boot. Remove the four screws that mount the inner boot to the floor. Two are on top and two are on the side. Pull the boot up out of the way.
5. Remove the bolts that mount the shift lever to the transfer case shift linkage and remove the lever from the linkage.
All Models
6. Remove door jamb scuff plates by carefully pulling up on them to release the mounting clips from the floorboard. Remove the front kick panels by pulling then out to release the mounting clips.
7. Pull back the carpet at all four cab corners (standard cabs) to reveal the plastic mounting bolt covers. Remove the plastic covers. These bolts can be loosened at this time. See Figures 1 and 2.
Get pdf Ford SuperDuty 3″ Body Lift Kit Installation Instructions
