2006-2007 Buick Lucerne Bracketron Phone Mount Installation Instructions
Before Installation of One Custom Bezel Mount and Instructions.
Begin installation by removing the dash bezel that surrounds the radio and climate control. To do this, insert the Dash Trim Tool (Part Number SIT-104) into the side of the bezel as shown in picture one. Begin with the lower right corner and release one clip. Continue by releasing the remaining 5 clips (Six total).
When the bezel is released from all six clips, disconnect the wiring from the back of the bezel if necessary. Set bezel aside carefully. With 9/32” socket and driver, release the upper right 9/32” screw from the radio. Set screw aside in a safe place.
Place CBM over upper right radio mounting tab and replace factory screw. Carefully reinstall the dash in reverse order securing all wiring to the bezel and screws. Install any Bracketron phone holder or AMP’s compatible device to your Custom Bezel Mount.
Get pdf 2006-2007 Buick Lucerne Bracketron Phone Mount Installation Instructions
