ACS 300 User’s Manual
This chapter states the safety instructions which must be followed when installing, operating and servicing the ACS 300. If neglected, physical injury and death may follow, or damage may occur to the AC drive, the motor and driven equipment. The material in this chapter must be studied before attempting any work on or with the unit.
This manual distinguishes two sorts of safety instructions. Warnings are used to inform of conditions which can, if proper steps are not taken, lead to a serious fault condition, physical injury and death. Notes are used when the reader is required to pay special attention or when there is additional information available on the subject. Notes are less crucial than warnings, but should not be disregarded.
This chapter describes the purpose and the contents of this manual and explains the conventions used within. This chapter also identifies the intended audience and lists the related documentation.
The purpose of this manual is to provide you with the information necessary to install, start-up, operate and service an ACS 300 AC drive. This manual also describes features and functions of the AC drive, as well as requirements for external control connections, cabling, cable sizes and routing.
Intended Audience
This manual is intended for those who are responsible for installing, commissioning and servicing the ACS 300 AC drive.
The audience is expected to:
• Have a basic knowledge of physical and electrical fundamentals, electrical wiring practices, electrical components and electrical schematic symbols.
• Have no prior experience of ABB products.
• Have no prior experience of the ACS 300 family.
• Have no prior experience of installing, commissioning, operating and servicing the ACS 300. With the help of this manual you will be able to install, start-up operate and service the ACS 300
Get pdf ACS 300 User’s Manual
