Guardian Personal Mobility Lift Interlock GRD601-CG Installation Instructions
Application Chevy/GMC Full Size Van (GMT 610) 2008 - All Engines 2009 - All Engines except 6.6L
GUARDIAN MODULE - Remove the lower dash panel below the steering column. The Guardian Module should be positioned in a secure area below the steering column. It can be secured using self tapping screws, adhesive foam tape, or wire ties. Do not secure the module until all harnesses are installed and proper lift operation has been verified.
LED DISPLAY PANEL – This harness can be identified by the blue tape near the 6-pin connector. Locate a suitable position on the dashboard, within view of the driver for the mounting of the LED Display Panel. The length of the display harness is 40”. This is the maximum distance the display can be from the Guardian module. Drill a พ” hole in the dashboard where you wish the center of the display to be. Snap the blue taped end of the LED display harness into the Guardian Module in the connector labeled in blue “Display”. Run the other end of the harness under the dash and out through the พ” hole. Snap the end of the display harness into the LED Display Panel. Ensure panel is level, and secure using the supplied screws.
Get pdf Guardian Personal Mobility Lift Interlock GRD601-CG Installation Instructions
