03-05 Hummer H2 P/N 200-183 Installation Instructions
Installation Instructions. Read Me!
I) DISCONNECT NEGATIVE (-) BATTERY CABLE.
II) Remove the Factory Air Box
a) Loosen Mass Air Meter hose clamps and set meter aside.
b) Unbolt the three air box hold down fasteners and save the bolts. See Fig#1
c) Lift out & remove the factory air box assembly from vehicle.
d) Remove and save the three rubber grommets, inserts and bolts. See Fig#2
III) Assemble the Airaid Cool Air Dam
a) Align Airaid top and bottom panels as show in Fig#3, and fasten together with saved grommets and inserts from Fig#2.
b) Install the black plastic filter adapter with provided hardware. See FIG#3
c) Mount the Airaid Premium Filter onto the black plastic adapter and secure with the hose clamp provided. See Fig#3
d) Press the supplied weather strip onto the upper rim of the Airaid Cool Air Box.
(Hint: for easy installation of weather seal, start on a corner) See Fig #3
IV) Install the Airaid Cool Air Dam
a) Position the Airaid system over the three factory mounting points & fasten with the saved factory bolts.
b) Reconnect MAF to inlet tube and adapter then tighten clamps.
c) Reconnect MAF wire harness
V) Finishing Up
a) Check for any foreign objects or debris in the intake path.
b) Reconnect the negative battery cable & double-check your work.
Get pdf 03-05 Hummer H2 P/N 200-183 Installation Instructions
