Audi A6 Instrument panel pdf
Removing steering column switch
Driver’s side airbag unit and steering wheel removed.
- Pull out steering column and tilt downward as far as it will go.
- Remove screws -1-(2x). Tightening torque: 2.8 Nm (25.2 in lb)
- Remove grip - 2-.
- Remove two Phillips-head screws -arrows-. Tightening torque: 0.6 Nm (5.4 in lb)
- Remove upper steering column switch trim -1-.
When installing, insert upper section into hooks on lower section, swivel downward and secure with screws
- Remove screws -2- (2x). Tightening torque: 0.6 Nm (5 in lb)
- Remove hex socket head bolt -1-.Tightening torque: 0.6 Nm (5 in lb)
- Remove lower steering column switch trim - 3-.
- Separate connection -1-.
- Release locking lugs -arrows- and pull coil connector with slip ring off steering column switch.
Note:
The steering must be in the center position (wheels in straight-ahead position) when the coil connector and slip ring are removed and installed.
Get pdf Audi A6 Instrument panel
