Suzuki TTL Manual - Throttle Actuator Installation Instructions pdf
This application can be a difficult throttle installation, and requires the use of a Torque Wrench in the installation. Since this engine is so tightly packaged, you may wish to have your Suzuki/OMC dealer install this for you. Read through the instructions completely before proceeding. If you have any questions, please don’t hesitate to call our technical service advisors. 1-800-588-7655.
Step One:
Disconnect motor from battery and or disconnect safety lanyard, to prevent motor from starting during throttle actuator installation
Step Two:
Remove Cover (cowling) from motor.
Step Three:
Remove the right side cover as described in the Service Manual.
Step Four:
Remove the carburetor as described in the Service Manual. Leave the fuel hose attached, as shown in figure 5.
Step Five:
Remove the outer throttle lever parts. See figures 5 and 6. Note the order and orientation of these parts as they are removed. See Figure 7
Get pdf Suzuki TTL Manual - Throttle Actuator Installation Instructions pdf
