Custom Search

NeoChanger Instruction Manual Guide

NeoChanger Instruction Manual Guide

Installation Preparation (All Vehicles) 1 Anti-Vibration Setup 2 Load/Unload Magazine 3 C H A P T E R 2 Dip-Switch Overview (REQUIRED) 5 Acura 6 Audi 7 Ford (Ford, Lincoln, Mercury) 8-9 GM (Buick, Cadillac, Chevy, GMC, Oldsmobile, Pontiac, Saturn) 10-11 Chrysler (Jeep, Dodge, Plymouth, Eagle) 13 Honda 14 Toyota 15 Volkswagen 16 C H A P T E R 3 Troubleshooting 17 Warranty/Warnings 18 FCC and Legal Information 19 Installation Preparation This chapter provides information required for the installation of the Neo Changer, it must be read by all users.

Thank you for purchasing the Neo Changer. Since the Neo Changer will works in many different vehicles the following steps must be taken to ensure the changer is set up correctly for the vehicle it is being installed in. Before Installation To prevent damage to your vehicle and the changer take the following precautions. 1. Turn off the ignition and remove the negative (-) battery cable prior to installation. NOTE: If the vehicle is equipped with an on-board drive or navigation computer, do not disconnect the battery cable. If the battery cable is disconnected, the computer memory may be lost. Under these conditions, use extra caution to avoid causing a short circuit during installation. If your radio has a security code make sure you know the code and how to enter it prior to removing the battery cable. The radio will require this code to operate when the battery terminal is reconnected. First Step (For All Vehicles) The first and most important step in using the Neo Changer is setting the dip-switches on the black box; this makes the changer compatible with the vehicle it is being installed in. The Neo Changer will not work if this step is not followed correctly. The dip switches can be found on the side of the black plastic box which connects to the changer. Switches are in the ON position when they are switched down. Black box settings for each vehicle can be found on the vehicles installation page. Refer to the index to find the page number within this manual that covers your vehicle.

Get pdf NeoChanger Instruction Manual Guide

Related Posts with Thumbnails