2004 and up Mazda 3 Short Throw Shifter Installation Manual
Tools Required:
-Philips head screw Driver
-3 small flat head screw drivers
-10mm Socket and ratchet
-Needle nose pliers
1. Unscrew the stock shift knob by rotating it counter clockwise.
2. Open the Storage compartment in the center console and remove the foam rubber mat in the bottom. Use a Phillips head screwdriver to remove the
2 screws.
3. Lift up on the rear of the console to begin removal.
4. Continue console removal by lifting the front of the console. The entire console can now be removed in one piece. Place the console in a safe place.
5. Unscrew the 2 screws at the front of the console.
Get pdf 2004 and up Mazda 3 Short Throw Shifter Installation Manual
