HUMMER H2 2003 and newer AMP Installation Guide
Due to vehicle-build variations the Power Step may not correctly align with vehicle cladding. Using supplied shims, please follow the instructions be- low to correct the alignment. Remove canister purge valve bracket from rock rail remove existing rock rail by unscrewing ten bolts Install new canister purge valve bracket on fourth set of holes from the front (upper bolt)
Mount front linkage assembly with existing bolts on the second set of holes from the front With 18mm socket
Mount motorized linkage with existing bolts on the fifth set of holes from the front. Use rearward hole set on linkage.
To mount running board, slide t-nut into position (Align with holes)
Tighten 4 screws with 3/16″ allen wrench
Get pdf HUMMER H2 2003 and newer AMP Installation Guide
