BC-box and BCLab software User manual
The Civinco series of electronic control boxes - The BC - makes it possible to tune your engine without the need to reprogram the stock ECU (engine control-box). Civinco can offer both tuneable and ready-tuned boxes which gives you the possibility to optimise your engine.
The BC-box is available in four versions:
BC250 – Ready tuned box for stock cars with 1-5 cylinder engines. Used as an alternative for chips and serial programming. No PC software is supplied with this box.
BC500 - Tuneable box for cars with 1-5 cylinder engines. Includes PC software enabling full tuning of engine parameters. Tunes fuel, ignition, extra injectors, NOS, shift light, water injection etc.
BC750 – Ready tuned box for stock cars with 6-10 cylinder engines. Used as an alternative for chips and serial programming. No PC software is supplied with this box.
BC1000 - Tuneable box for cars with 6-10 cylinder engines. Includes PC software enabling full tuning of engine parameters. Tunes fuel, ignition, extra injectors, NOS, shift light, water injection etc.
The BC-box is connected between the stock ECU and the main harness, or it can be connected directly to sensors, injectors etc. This makes it possible to alter some in- and output signals which is necessary in all electronic tuning. The basic principle is that the BC-box will increase the boost pressure and add more fuel and at the same time “hide” this information from the ECU. In this way the ECU controls the engine during normal operation such as cold-start and idle etc but the BC-box controls the engine at high power. Common to all versions of the BC-box is that all tuning data is stored on a TuneCard (memory card) which is easily exchanged while driving to give the engine different behaviour such as; imobilizer, rpm-limiter, exotic fuels, max fuel efficiency or maximum power.
Get pdf BC-box and BCLab software User manual
