QL Boat trim system User and Installation Instructions
This batch with its accompanying instructions is produced for Volvo Penta’s service workshops, boat-builders, machine manufacturers and other authorized workshops which have personnel with qualified professional training.
The installation instructions are only produced for professional use and are not intended for non-professional use. Volvo Penta will not assume any liability whatsoever for damage incurred, either damage to materials or personal injury, which may result if the installation instructions are not followed or if the work is carried out by non-professional personnel.
Presentation of the QL Boat Trim System
The system comprises:
A. Control Unit
B. Control Panel
C. Interceptor Units
D. Cable between Control Unit and Interceptor Unit
E. Cable between Control Unit and Control Panel
The system is designed for planing boats, max boat speed of 50 knots (57 miles/h). The system can also be used on semi-planing boats, see sizing guide lines. The Interceptor units are available in two lengths, 300 mm (12″) and 450 mm (18″). They can be installed individually or side by side, i.e. two units on each side of the transom (300 + 300 (12″ + 12″), 300 + 450 (12″ + 18″) or 450 + 450 (18″ + 18″)).
Get pdf QL Boat trim system User and Installation Instructions
