1996-2003 FORD 7.3L Power Stroke Diesel Vehicles Power Programmer III Installation Instructions
You are the owner of the Power Programmer III, the latest in high-performance tuning technology. Now you can optimize your engine’s tuning, as well as adjust other vehicle parameters (see table of contents), all at the touch of a button. Your vehicle has an onboard computer that controls the engine and transmission. Inside your vehicle’s computer is a FLASH memory chip which contains the vehicle’s programming. The programmer actually reprograms this FLASH computer chip, according to your specifications, with Hypertech’s Power Tuning. This is the only way an individual can reprogram some 1994-1995 and all 1996 and newer vehicles sold in the United States.
To reprogram your vehicle’s computer, simply plug the programmer cable into the vehicle’s diagnostic connector located under the dash panel on the driver’s side. Set the parking brake. Next, turn the ignition key to RUN but do not start the engine. Press the L arrow on the programmer. It will then identify your vehicle and display a series of options on its screen. When completed, turn the key to OFF and disconnect the cable from the diagnostic connector. Now you’re ready to Feel the Power! Hypertech’s Power Tuning can be stored in only one (1) vehicle at a time. The Power Programmer can be reconnected to remove the Power Tuning and return the vehicle to the factory programming at any time. After you have performed this step, your vehicle will be in its stock configuration.
You may also reconnect your programmer at any time to change the programming. For example, if you have replaced your factory tires with different diameter tires, you will want to correct your speedometer, odometer, and automatic transmission shift points. Simply reconnect your programmer, answer the necessary option(s), and reprogram your vehicle. You do not have to return to stock first.
Get pdf 1996-2003 FORD 7.3L Power Stroke Diesel Vehicles Power Programmer III Installation Instructions
