2005-2008 Ford F350 4×4 Level Lift Installation Instructions
Step 1:
Position truck on a flat surface and block the rear wheels to keep it stable. Starting on the driver side remove the stock shock absorber and retain hardware.
Note: New longer front shocks will be needed for this installation. Level Lift™ recommends a shock that measures 23″ fully extended. ProComp* 924553 flirti ss
Step 2:
Continuing on the drivers’ side, remove the stock sway bar frame mount, retain the hardware for re-installation.
Step 3:
Next remove the stock brake line bracket from the bottom of the stock coil spring, keep the hardware for re-installation. For 05-08 F250 4×4 see addendum.
Step 4:
Scribe a mark on the lower coil spring plate as well as the coil spring. This is done to re-install the coil in the exact location. (Repeat Steps 1 thru 4 on passenger side of vehicle)
Step 5:
Place a pair of hydraulic jacks under the frame on both sides of vehicle. With a second persons help, raise the vehicle until the top of the coil springs are separated from the upper coil location. Keep raising jacks until coils can be removed
Get pdf 2005-2008 Ford F350 4×4 Level Lift Installation Instructions
