2003-2006 Ford Crown Victoria 41F-12-F Front Shocks
1. The electrical power to the air suspension system must be turned o prior to hoisting, jacking or towing an air suspension vehicle. Failure to do so can result in unexpected ination or deation of the air springs, which can result in shifting of the vehicle during these operations. Turn the air suspension service switch o.
2. WARNING: Do not remove the center nut. This nut holds the upper spring mount in place and if this nut is removed the spring tension will be released. Failure to follow these instructions may result in personal injury. Remove and discard the nuts.
3. Remove the wheel and tire assembly.
Removal and Installation
4. Remove the bolts and position the caliper, pads and anchor plate aside.
5. Remove the brake disc.
6. NOTE: Use the hex holding feature to prevent the stud from turning while removing the nut. Remove and discard the nut.
Removal and Installation
7. NOTE: Use the hex holding feature to prevent the stud from turning while removing the nut. Remove the nuts and the stabilizer bar link.
* Discard the nuts.
8. Detach the retainer.
9. NOTE: Use the hex holding feature to prevent the stud from turning while removing the nut. Remove and discard the nut.
Get pdf 2003-2006 Ford Crown Victoria 41F-12-F Front Shocks
