2009-2010 Hyundai Multi Vehicle Mount MVM-35-05 Installation Manual
The Multi Vehicle Mount is an (end user-installer) modifiable professional mounting bracket for most all mobile electronics requiring a steady and secure installation in a motor vehicle. The MVM installs behind your vehicles dash panel using existing or non-visible holes and is designed to cleanly protrude out from your vehicle’s dash panel. Before installing, you must take the time to read and understand this installation manual and read all the warnings accompanying this product.
Instructions Include: tools needed for install, directions for dash panel removal, directions for modifying the MVM if required.
Dash Disassembly Instructions:
- With a dash trim removal tool, carefully pry up on the shifter bezel. Apply the parking brake and shift he car into neutral and move the shifter bezel back.
- Carefully pry out and remove the 2 vertical panels to the left and right of the center pocket. Remove (2) 8mm screws holding the trim pannel above the pocket in and remove trim pannel.
- With a dash trim removal tool carefully pry out and remove the heater controll/ radio bezel. Remove (4) 8mm screws holding the radio in and remove the radio.
- Place the MVM on the dash as shown and secure with the supplied phillips screws.
- Carefully reinstall the dash in reverse order securing all screws and clips to the bezel. Install the included Ultra Slim Swivel #PHS-203 to your Multi Vehicle Mount or any other AMPs compatible device.
- Your installation is complete
