1984-2001 Jeep XJ Front Coil Spacer/Rear Add-a-Leaf Lift 1.75″
INSTALLATION INSTRUCTIONS
1. Park the vehicle on an appropriate work surface. Ensure that the vehicle is in park for automatic transmission or in first gear for manual transmissions and the parking brake is applied. Block the wheels for added safety.
fRont InStAllAtIon
2. Remove the bolt mounting the front track bar to the passenger’s side of the axle (Figure ). Save track bar bolt and nut tab. Allow the track bar to hang free. Note: The track bar bolt may require a T‑50 Torx socket on early models.
3. Raise the front of vehicle with a hydraulic jack and place jack stands under the frame rails, just behind the lower control arm pockets.
4. Remove the wheels.
6. Support the front axle with a hydraulic jack. Remove the shocks. Save the lower shock hardware.
7. Remove the upper mounting nut from the sway bar links (Figure 2). Swing the sway bar up off of the links. Save all hardware/bushings.
Get pdf 1984-2001 Jeep XJ Front Coil Spacer/Rear Add-a-Leaf Lift 1.75″
