Eurojet Front Mount Intercooler TDI install
This is how I installed my Eurojet Intercooler, hopefully its helpful to you.
Basic Steps
Removing the bumper fascia
Remove the bumper
Removing OEM intercooler and piping.
Install new intercooler, bumper and piping.
Trim and Re-install bumper fascia
Removing the front bumper fascia.
Remove the two yellow side marker lights by pressing on the front end of the light (it is spring loaded) and pushing it forward to remove it. Then pull the bulb from the housing. Locate the 4 torx screws in the wheel well attach to the bumper plastic and remove them.
Disconnect the hood release lever from the hood latch. While slightly pulling in the release, lift the retainer clip out of the way and then place a screwdriver between the plastic fork and prying it apart and freeing it from the latch mechanism. You do not have to pull the lever out of the grill itself.
Remove the front grill by pulling up the corners until the pop free then push down on the center tab with a screwdriver and pulling it away from the car. Pull the top of the grill away from the car slightly and pull upwards, the bottom should pop free.
Get pdf Eurojet Front Mount Intercooler TDI install
