MITSUBISHI PAJERO VEHICLE ALARM FITTING INSTRUCTIONS
Position the compact alarms and the sirens in the engine compartment, on the support of the passenger’s side shock absorber. Pass the cables through the original core hitch located in the bulkhead that divides the engine compartment and the passenger’s compartment, passenger’s side.
CENTRAL UNIT POSITION
The modular systems and the modules should be positioned on the left of the dashboard, driver’s side.
POWER SUPPLY
+30: connect to the 4 mm 2 RED wire located in a multiway connector, in the fuse box.
-31: connect with a terminal cable directly to the car body. IGNITION WIRE
+15/54: Connect to the BLACK/WHITE wire with SILVER reference located in the wiring harness placed on the left, along the steering column.
DIRECTION INDICATORS
Connect to the GREEN/RED wire at the position nr.9 and to the
GREEN/YELLOW wire with SILVER reference at the position nr.7 located in the
15 way white connector, in the lower part of the fuse box placed under the driver’s side dashboard.
ELECTRIC WINDOWS
BUS controls
The signals to make the module connection are not available.
CENTRAL DOORS LOCKING
Negative control signal
Connect to the LIGHT GREEN/BLACK wire (lock) and to the BROWN/BLACK wire (unlock) located in the 32 way white connector placed on the left of the fuse box, under the driver’s side dashboard. For the Bridge serie antithefts make reference to the diagram nr.73 and for the 3100 serie antithefts make reference to the diagram nr.73A
Get pdf MITSUBISHI PAJERO VEHICLE ALARM FITTING INSTRUCTIONS
