2004-2005 Acura TSX Figure Grille Set Installation Manual
Acura TSX Figure Grille Installation
1) PREPARATION
1.1) Remove the OEM fog light grilles, if this item was purchased. The stock fog light opening covers are held in place with spring clips attached to the cover. Work a finger between the cover and the bumper, and pull outward to release the cover.
1.2) The lower center grille is not removable; it is bonded to the bumper, and it will be left in place.
1.3) Loosen the underbody. In order to gain access to the back of the grille later in the installation process, remove the three pop-top fasteners and two bolts shown in Fig. 1. DO NOT remove the bolts with the circle and bar symbols. Refer to Fig. 2 for the pop-top removal procedure.
1.4) Black out the fog light openings (optional.) On vehicles with lighter paints, it may be desirable to black out the fog light openings, as shown in Fig. 1, so the light paint does not show through and detract from the new grilles. If you choose this option, the blacked out portion of the bumper WILL NOT affect the appearance of the vehicle should you or another owner ever decide to reinstall the stock fog light opening covers or to install fog lights. Visit www.FigureLLC.com for the full procedure.
Get pdf 2004-2005 Acura TSX Figure Grille Set Installation Manual
