2005 and up Chevrolet Cobalt TWM Performance Short Shift Kit Installation Manual
It’s preferable to park on a flat surface, as you may have to engage and disengage the hand brake and shift from gears to neutral. If you can’t do so and are obliged to install the short shifter on a slightly inclined surface, place wooden blocks in front or behind the wheels to prevent the car from moving while you’re working.
Tools required:
- Flat head screw driver (large and small)
- Philips head screw driver
- Needle nose pliers
- Ratchet
- 8 mm socket
- 10 mm socket
- 12 mm socket
- 7/16” socket
- 1/8” Allen key
- All purpose grease
- WD-40 or any rust-remover product
1. Locate the center plastic panel under the handbrake. Pull up on it and put it in a safe place.
2. Locate the rear plastic panel that is just behind the one you just removed. Pull up on it and put it in a safe place.
Get pdf 2005 and up Chevrolet Cobalt TWM Performance Short Shift Kit Installation Manual
