ACDC01 AC Line Kit for Acura Integra DC 94-01
Below you will find instructions on how to install your AC Line kit for the Acura Integra DC 94-01 Chassis.
*AC Kit may not be legal for highway use. Hybrid Racing is not responsible for any direct or indirect, actual or incidental expense attributed to the use of any performance parts sold by Hybrid Racing LLC. Purchasers agree to all of the terms of this agreement upon the purchase of parts.
More information can be found at www.hybrid-racing.com.
PACKAGE CONTENTS: 4 AC Line’s, Relay, and Install Guide.
PARTS NEEDED: Stock DC evaporator and the 2 hard lines that attach to it as well as the stock DC condenser.
TOOLS NEEDED: Basic hand tools for installation of lines and Cut of wheel for removal of small stud and clearance on battery tray.
RECOMMENDED TOOLS: Soldering iron, solder and heat shrink.
1. Begin by removing the battery and battery tray as well as any stock AC lines that are attached to the firewall.
2. Underneath the battery tray there will be a stud that will need to be removed. You will know what stud to remove as it sits in the way of the AC line. If you do not remove the stud it will puncture the AC line.
3. On the back of the battery tray you will need to remove a small amount of material to clear the top of the AC line. This can be done with a small grinder.
4. You can now install both lines with the LABEL FIREWALL using the stock AC bolts. Make sure that the “O” rings are on the lines otherwise you will have a leak. The “O” Rings are delicate so be very careful when installing the lines, this can not be stressed enough.
5. Run one end of the newly installed AC lines into the AC compressor. It will only fit one way and is LABELD COMPRESSOR. Make sure that the “O” rings are on the lines otherwise you will have a leak. The “O” Rings are delicate so be very careful when installing the lines.
6. The other AC line will have the LABEL LINE A on the end. Locate the all aluminum hard-line also with the LABEL LINE A. Connect both Lines with the LABEL LINE A Together. The aluminum line can be manipulated to fit your chassis, make sure to not over bend the line.
Get pdf ACDC01 AC Line Kit for Acura Integra DC 94-01
