FSK-6000 Two Way Car Security System Owner’s Manual
This operation manual details the use of the device contained in the package. It is recommended to look for an experienced technician for device installation.
Warning
Changes or modifications not expressly approved by the manufacturer will void the warranty and the user’s authority to operate the device.
This device complies with Radio Frequency Rules in respective countries.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operations.
System Installation Guide
Main Unit Installation
The main unit is placed under the vehicle control panel. After fixing the main unit in a suitable place, start connecting all the wiring according to the Wire Connection Diagram. Before putting back all the OEM parts, simply test the system functions first. The main unit must be fixing tight
Shock Sensor Installation
Install the shock sensor after fixing the main unit. It is recommended to place the shock sensor near the doors for
easy detection of any intrusions. To adjust the sensitivity of the shock sensor, simply use a screw to turn the knob
on the shock sensor, turning right to set a higher sensitivity or vice verse. Then test the sensitivity by triggering the shock sensor.
NOTE: Please do not hit the shock sensor directly.
Antenna Position
The ideal position for the antenna is in the top corner of the front windscreen right up of the wheel side. Please keep the antenna free from any obstructions to prevent reception interference. NOTE: If the vehicle is parked in urban area with many buildings around, or under a strong electric field environment, the reception will be affected.
Get pdf FSK-6000 Two Way Car Security System Owner’s Manual
