MoboScan 8300 VW/AUDI Code Reader User’s Manual
The MoboScan8300 VW/AUDI Code Reader is specially designed to work with most Volkswagen and Audis sold Worldwide of 1990 or newer models. If a VW/AUDI has a 16-pin “OBD-II style” Data Link Connector (DTC), the Code Reader will certainly work. If it has an old-style 2×2 Data Link Connector (DTC), then it depends on whether there are 4 or 3 wires connecting to the pins. If there are 4 wires, each connecting a pin, then it will work. If there are only 3 wires, leaving one pin disconnected, then it will not work. For VW/AUDIs with old-style 2×2 Data Link Connector (DTC), you need to have a 2×2 cabling adapter which is not included in this product package.
Operating Instructions
CAUTION: Don’ t connect or disconnect any test equipment with ignition on or engine running.
1. Turn the ignition off if it is on.
2. Locate the 16-pin Data Link Connector (DLC), and plug into the Code Reader cable connector.
3. Wait for the LCD display to read “MoboScan 8300”.
4. Turn the ignition on, but do not start the engine.
5. When the display indicates “ ENGINE READ?”, press and release the READ button. An “ENGINE LINK…” message is observed on the display.
Get pdf MoboScan 8300 VW/AUDI Code Reader User’s Manual
