VAG Airbag Reseter User’s manual
FUNCTIONS
·Data fault repair of Audi/VW/Opel airbag modules
·Crash data reset of Audi/VW/Opel airbag modules
HARDWARE
·Yellow -Button is used to repair data fault
·Red -Button is used to reset crash data
·Led-Indicators are used to indicate the operating state, while the red led indicate ‘power on’, the green led indicate ‘busy’ and ‘error’, and the yellow led indicate ‘usb port connected’.
·OBD cable is used to connect the tool to the diagnosis socket of the car.
·USB cable is used to connect the tool to the computer for firmware updating.
·Power-Connector is used to supply 12V-DC to the tool. (center of the connecter is power +)
·Adapter-Connector is not used at present.
HOW TO USE
·Data Fault Repair: connect the airbag reseter and the car’s diagnosis socket by the OBD cable, the red led light up, push the yellow button, the green led light up, and for a while the green led black out, this means the data fault has been repaired successfully. ( if the green led becomes flashing, that mean the communication between the tool and the car failed, or data fault repair failed, check the connection and repeat the above procedure.)
·Crash Data Reset: connect the airbag reseter and the car’s diagnosis socket by the OBD cable, the red led light up, push the red button, the green led light up, and for a while the green led black out, this means the crash data has been reset successfully. ( if the green becomes flashing, this mean the communication between the tool and the car failed, or crash data reset failed, check the connection and repeat the above procedure.)
Get pdf VAG Airbag Reseter User’s manual
