Ford F150 Pro Step Installation Instructions
Before you install this kit, read and understand all instructions, warnings, cautions, and notes in this instruction sheet and in the vehicle owner’s manual.
CAUTION
Proper installation of this kit requires knowledge of the factory recommended procedures for removal and installation of original equipment components. We recommend that the factory shop manual and any special tools needed to service your vehicle be on hand during the installation. Installation of this kit without proper knowledge of the factory recommended procedures may affect the performance of these components and the safety of the vehicle. We strongly recommend that a certified mechanic familiar with the installation of similar components install this kit.
Prepare to Install Kit
Drivers Side of Vehicle
1. Install kit brackets (body mounted).
a. If equipped with factory steps remove and note hole locations as ORF Pro-Steps will mount in same location.
b. If not equipped with factory steps, locate Mounting holes on underside of body as shown below. Two holes on lower lip of body mount may have J-Nuts clipped in them. If there, remove J-Nuts from body.
Get pdf Ford F150 Pro Step Installation Instructions
