1998-2003 S-Series Blazer, 2/4wd, ZR-2 2″ Body Lift Installation Instructions
1. Park the vehicle on a clean, flat surface and block the wheels for safety. Place automatic transmissions in park and manual transmissions in neutral.
2. Remove the negative battery cable first, then the positive battery cable. If equipped, the Supplemental Restraint System will be deactivated when the battery is disconnected.
3. Measure and record the space between the bumpers and the body for reference during installation of the kit.
fRont/undeR hood
4. Remove the grill by pulling the ten retaining clips free from the core support. Remove the turn signal lamps from the signal housings. If equipped, remove the two wire harness connectors from the running lights and remove the grill from the vehicle (Fig 1).
5. Remove the front bumper by removing the four bolts mounting the bumper to the frame horns (Fig 2) and two bolts (one on each side) mounting the bumper to the outside bumper brackets (Fig 3). Remove the bumper from the vehicle.
Get pdf 1998-2003 S-Series Blazer, 2/4wd, ZR-2 2″ Body Lift Installation Instructions
