VOICE ACTIVATED CELLULAR TELEPHONE/CD CHANGER INSTALLATION
Application specific D2B notes:
• The CD changer fiber is installed in the vehicle at the factory.
• The vehicle is configured at the factory for the CD changer only, except in vehicles with COMAND.
• Tele Aid is part of the D2B ring in vehicles equipped with COMAND.
• Telephone and voice recognition fibers are daisy chain links included in the installation kit for their respective accessories.
• Straight D2B connectors are utilized for the CD changer and voice recognition module and the angled connector is used for the telephone PSE.
Installation preparation—all configurations
1. Read this bulletin in its entirety.
2. Unpack and compare the installation kit(s) contents against the Parts Information list on page 13.
3. Place the operating guides/client accessories (i.e. chargers, cassette tapes, CDs, etc.) in the glove box or appropriate storage compartment.
4. Remove the trunk mat.
5. Determine the number and sequence of the D2B components to be installed and then locate and configure all fiber optic cables.
Note: Refer to S-B-82.64/135A, “D2B Fiber Optic Configuration and Version Coding” for proper handling and configuration of D2B fibers.
6. Proceed to:
• Section B for telephone installation.
• Section H for CD changer installation.
Get pdf VOICE ACTIVATED CELLULAR TELEPHONE/CD CHANGER INSTALLATION
