Bed Extender Bracket Installation Instructions
BRACKET MOUNTING INSTRUCTIONS
Step 1. Remove contents from box and check for damage. Verify all parts against parts list. Read and understand instructions completely before installation.
Step 2. Position and hold template on passenger side for quick latch bracket as shown (See Figure 1). (FOR TOYOTA, NISSAN, CHEVY S-10, GMC up to 94, and MAZDA up to 94 a separate bracket kit must be ordered). Using a center punch, punch each hole. NOTE: If the truck has a bed liner, center punch the bed liner. DO NOT CUT THE BED LINER! Repeat for driver side.
Step 3. Verify hole locations before drilling and make sure quick latch bracket will not interfere with closed tailgate. (See Figure 2). Drill mounting holes for quick latch brackets using 9/64 drill bit (See Figure 2).
Step 4. Mount passenger side quick latch bracket using (3) Phillips head sheet metal screws. (If the truck has a bed liner, mount quick latch bracket on top of bed liner) (See Figure 3). Repeat for driver side.
Get pdf Bed Extender Bracket Installation Instructions
