BBR’s KLX/DRZ110 Billet Aluminum Brake Pedal
Since installation of this kit is beyond the control of BBR Motorsports, Inc, we cannot accept responsibility for misuse or improper installation. This kit is intended only for use on off-road motorcycles. These instructions are intended only as a supplement to the proper Kawasaki/Suzuki service manual. If the installation of this product is beyond your technical abilities please refer to a qualified service technician.
1. Place bike on stand and remove stock brake pedal (10mm bolt), brake pedal rod, and kickstarter.
2. Replace the lower rear motormount bolt’s nut with the special nut included in this kit (torque to 40 ft. lbs).
3. Install the brake rod into the BBR brake pedal and reinstall the cotter pin.
4. Hook brake pedal spring on the brake pedal. Install the stock o-rings in the BBR pedal.
5. Install the brake pedal (tighten 10mm bolt to 79 in lbs). Be sure to hook the return spring on the frame.
Get pdf BBR’s KLX/DRZ110 Billet Aluminum Brake Pedal
