Chevrolet Tracker Suzuki Sidekick/Vitara Years 99-2004 Hardtop Installation Instruction
Refer to your Owner’s Manual for instructions on lowering and removing the canvas top. ALL hardware for your soft top should be removed. This includes the trim around the body. Some of the screws from the Canvas Top Hardware will be used in the Hardtop installation, so keep them available.
Front Lid Installation
STEP 1: Place the Front Lid in position over the Driver and Front Passenger seats.
STEP 2: Take the 2 Curved Joint Brackets (BRK-10) and place them on the bolt threads extending from the Fiberglass Lid, and hold them in place with 2 Speed Knobs (SKB-1).
STEP 3: After the Lid is in position, hook and close the front of the lid with the Windshield Cam Locks (It may be necessary to loosen the front factory cam locks with a Phillips head screwdriver for additional adjustment in some cases), and then tighten the Speed Knobs and Rear Brackets into place, so that the Curved Joint Brackets (BRK-10) tighten against the cross bar of the vehicle. (Diagram B)
Get pdf Chevrolet Tracker Suzuki Sidekick / Vitara Years 99-2004 Hardtop Installation Instruction
