91-95 Ford F-250/350 7.5L PowerAid Throttle Body Spacer Installation Instructions
Installation Instructions. Read Me!
1. DISCONNECT NEGATIVE (-) BATTERY CABLE.
2. Remove throttle body intake assembly.
3. Remove (2) bolts & save from linkage bracket. (Ref. C)
4. Remove (4) bolts from the throttle body. (Ref. D)
5. Remove gasket and clean surfaces.
6. Install power plate using (2) gaskets. (Ref. A)
A. Place one gasket between the throttle body and power plate.
B. Place second gasket between the power plate and manifold.
7. Replace (4) bolts using Step 4 as an example.
8. Locate and install (2) linkage plates using (2) flat head screws. (Ref. C)
9. Reinstall linkage bracket using saved bolts. Refer to Step 3
10. Inspect & Test the throttle linkage for full open & closed travel before driving. Some cruise or kickdown cables may require adjustment. Please refer to your vehicles service manual for proper adjustment.
11. Reinstall throttle body intake assembly using Step 2 as an example.
12. Reconnect battery cable. Enjoy.
Get pdf 91-95 Ford F-250/350 7.5L PowerAid Throttle Body Spacer Installation Instructions
