1988-1998 Chevy Silverado & GMC Sierra Hog Bar Installation Instructions
Pre-installation Preparation
1. Verify kit contents.
2. Remove protective wrapping from hog bar
and place on a non-abrasive surface.
3. Remove the brackets and hardware from
the box.
B. Remove Tow Hooks
1. Locate the Bolts that hold the tow hooks in
place we will be using these bolts for the
brackets.
2. Remove the bolts that hold the tow hooks
in place by using an 18mm socket these
bolts are threaded into a plate on the inside
of the frame.
C. Install Brackets
1. Begin to mount the brackets in place where
you removed the tow hooks shown in (fig.
C1) using the bolts you removed in step
two.
IMPORTANT: Make sure you leave
these bolts loose.
D. Install Hog Bar
1. You will need to remove your license plate
so you can attach it to the front of your hog
bar.
2. Place hog bar up to the brackets and threadthe bolt with washer into the hog bar.
3. Tighten the bolts that mount from the bracket to the hog bar for both sides.
4. Center the Hog Bar on the truck.
5. Tighten the bolts that hold the bracket to the frame of the truck for both sides.
6. Make sure all bolts are tight & license plate is secured to the front of the hog bar.
Get pdf 1988-1998 Chevy Silverado & GMC Sierra Hog Bar Installation Instructions
