99-05 Chevy/GMC K1500 Dual Shock Kit Installation Instructions
This kit should only be installed on a vehicle that is in good working condition. Before you install the kit, thor- oughly inspect the vehicle for corrosion or deformation of the sheet metal around the factory body mounts. If the vehicle is suspected to have been in a collision or misused, do not install this kit. Off-road use of your vehicle with this kit installed may increase the stress applied to the factory body mounts. We do not recom- mend that any vehicle with a body lift kit installed be involved in any extreme off-road maneuvers such as jumping. Failure to observe this warning may result in serious personal injury and/or severe damage to your vehicle.
Before Starting Installation
1. Carefully read all warnings and instructions completely before beginning.
2. Verify all parts have been received in this kit by checking the parts list at the end of this document
3. Only install this kit on the vehicle for which it is specified. If anytime during the installation you encounter something different from what is outlined in the instructions, call technical support at (928) 636-3175
4. Special tools needed:
a. 1” Drill Bit or Hole Saw
b. Welder or access to a professional welding shop
c. Drill Motor.
NOTE
Kit parts are prefaced by the word kit and appear in bold print.
NOTE
This kit is not intended to replace the existing single shock. It is meant to compliment the existing suspension system’s handling characteristics. No existing parts on the vehicle should be removed or discarded during installation of this system.
Get pdf 99-05 Chevy/GMC K1500 Dual Shock Kit Installation Instructions
