PickUp Truck Installation Instructions
1. Line up the 48” Tracks so the outside of the tracks are 50” apart.
Note: On Ford F150 you will only be able to space the 48″ tracks 49 1/2″ apart, up against the wheel wells.
2. Now line up the edge of the tracks 6” from the back of the bed.
3. Notice the 5 pre-drilled holes in the tracks - drill a 1/8” pilot hole in each location for the Pan Head Sheet Metal Screws. Also, depending on the vehicle, use the supplied track shims to level the bottom of the track due to the ribs on the bottom of the bed.
4. Using the Pan Head Sheet Metal Screws and a Screw Driver, screw down the 48” Tracks.
5. Take the 2 24” Tracks and line them up at the back of the 48” Tracks so they are facing the same direction, and are also 50” apart on the outside.
Note: vehicles with shorter beds like the Crew Cab Trucks may need to shorten the 24” tracks, and require new holes to be drilled into the tracks to secure them properly.
6. Take the 3 pre-drilled holes in the 24” tracks and drill a 1/8” pilot hole in each location for the Pan Head Sheet Metal Screws.
7. Using the Pan Head Sheet Metal Screws and a Screw Driver, screw down the 24” Tracks
8. This step is specific to the follow Vehicles:
Ford F150 / Dodge Ram
On the back side of the Driver Side, Side Box measure 3” (2” for 8ft bed) in from the left side of the Side Box and mark.Then measure 3” (2” for 8ft bed) up from the bottom of the Side Box and mark. Now drill a 1/8” pilot hole in this location. Repeat this step for the Passenger Side, Side Box.
Chevrolet Silverado/GMC Sierra / Ford F250/F350 Lay the Drivers Side, Side Box on its side, so the back section that sits against the bed is down. Now on the bottom section of the Driver Side, Side Box that rest over the wheel well, measure 3” (1 ½” for 8ft bed) in from the right side of the Side Box and mark. Then measure 3” down from the top of the Side Box and mark. Now drill a 1/8” pilot hole in this location. Repeat this step for the Passenger Side, Side Box.
Get pdf PickUp Truck Installation Instructions
