AD38 Chrysler/Jeep/Dodge Skim Pin Code ByPass Operating Manual
The AD38 is a small standalone device that can overwrite the pin code stored within the skim module fitted to Chrysler/Jeep & Dodge vehicles fitted with CAN 2,3,4,5 and 6 systems. This will then allow new keys to be programmed into the vehicle. The skim module is Chrysler terminology for a combined immobiliser and aerial module. Writing a new pin code to the skim module involves removing the Skim module, which is located around the ignition barrel, from the vehicle, which is a fairly simple process.
The pin code that is written to the skim module is a fixed code that is shown on the rear of the actual tool. Once the new pin code has been written to the module, keys can be programmed into the vehicle by using any Advanced Diagnostics key programming tool.
AD38 - OPERATION
1. Disconnect & remove immobiliser unit from around the ignition barrel of the vehicle.
2. De-solder the coil connections and remove the electronic pcb
3. Remove the varnish from the legs of the chip on the pcb.
4. Clip the connector over the chip, with the black dot on the connector on pin 1.
Get pdf AD38 Chrysler/Jeep/Dodge Skim Pin Code ByPass Operating Manual
