DODGE Vizorlight Charger/Magnum Hardware & Installation Manual
This VIZORLIGHT‐S®:
• Is designed for use with 2006 through the current Dodge Charger/Magnum model.
• Is designed and intended to function as an emergency warning light mounted to the windshield visors.
• Has an electric operating system requirement of 12 volts DC, with a negative ground.
• Will operate independently or in conjunction with Rontan light controllers or universal light controllers (ICM30® or ICM40® required).
• Stores all flash patterns in the light assembly intelligence.
• Plug‐and‐play operability and modular design of the light heads facilitate installation, quick color changes, and field upgradeability.
• Is vehicle specific and if used with other models or applications, may require some modifications.
• Is engineered with Rontan’s two‐wire technology capability for ease of installation and quick programming.
• All Rontan North America products are SAE compliant and meet Calif. Title 13 standards
Hardware Guide:
Step 1
Remove the light and attachment hardware from the packaging.
Step 2
Remove the visors and visor clips using a T20 Torx driver. Do not discard the screws as they will be needed for reinstalling the visor clips and visors later
Step 3
Slide the brackets into the proper Vizorlight‐S® slots as shown and then flip the brackets up to align the screw holes. Loosely attach the brackets to the Vizorlights‐S® with the supplied black screws and washers.
Get pdf DODGE Vizorlight Charger/Magnum Hardware & Installation Manual
