Model 1250 Wheel Balancer
General safety recommendations
- The wheel balancing machine should only be used by duly authorized and trained personnel.
- The wheel balancing machine should not be used for purposes other than those described in the instruction manual.
- Under no way should the wheel balancing machine be modified except for those modifications made explicitly by the manufacturer.
- Never remove the safety devices. Any work on the machine should only be carried out by specialist personnel.
- Avoid using strong jets of compressed air for cleaning.
- Use alcohol to clean plastic panels or shelves (AVOID LIQUIDS CONTAINING SOLVENTS).
- Before starting the wheel balancing cycle, make sure that the wheel is securely locked on the adapter.
- The machine operator should avoid wearing loose clothing. Make sure that unauthorized personnel do not approach the machine during the spin cycle.
- Avoid placing objects inside the base as they could impair the correct operation of the machine
Commissioning
Anchoring
The machine can operate on any flat non resilient floor.
Make sure that the machine rests solely on the three support points provided (fig.2a).
It is advisable to secure the system to the ground using the specific feet (see Figure 2a) in the event of continual use with wheels weighing over 75 lbs.
Electrical connection
The machine is supplied with a 110V grounding plug.
The supply voltage is given on the machine nameplate. It cannot be changed.
Connection to the mains should always be made by expert personnel.
The machine should not be started up without proper grounding.
Connection to the mains should be through a slow acting safety switch rated at 8 A (115V). See enclosed layout.
Get pdf Model 1250 Wheel Balancer
