1987-1993 Ford Mustang GT - 8Cyl 5.OL Installation Instructions
When working on under or around any vehicle exercise caution. Please allow the vehicle’s exhaust system to cool before removal, as exhaust system temperatures may cause severe burns. If working without a lift, always consult vehicle manual for correct lifting specifications. Always wear safety glasses and ensure saje work area. Serious injury or death could occur if safety measures are not followed.
Step 1 To begin removal of your OEM exhaust system, you will need to cut the tail-pipes just behind the mufflers. Remove the tail pipes from the OEM rubber insulators. Do not damage the OEM rubber insulators, as they will be re-used with your new system. Next unbolt the extension pipes from the H-pipe and remove the mufflers from their OEM rubber insulators. Do not discard the fasteners required to bolt the extension pipes to the mufflers, as they will be re-used.
Step 2: Remove the existing muffler mount brackets, and replace them with the new brackets supplied in the kit. Do not discard the OEM mount fasteners, as they will be re-used. Refer to diagram #2 for installation of the new muffler mounts.
Step 3 S Starting at the H-pipe, begin installing your new exhaust system by bolting up the front extension pipes with the flanges supplied in the kit and the OEM fasteners. Working rearward, install the mufflers, tail pipes and tips, using the supplied clamps, hangers and fasteners. Leave all components loose until a final position has been set.
Get pdf 1987-1993 Ford Mustang GT - 8Cyl 5.OL Installation Instructions
