UVS Operating & Applications Manual
The UVS is an Advanced Serial Diagnostic system which has been designed and developed to offer the most advanced diagnostic capabilities. The UVS can be used as a hand held portable diagnostic system, and is equipped with 64MB of RAM which is used for the application data, and 4MB of Flash for the protocol handling system. In addition to this it has a RS232 interface connection for transferring application data from a PC and printing.
The unit has a 128×64 Dot Matrix Back Lit LCD TFT display along with membrane keypad. The unit is capable of reading fault codes, clearing fault codes, displaying live data, performing special functions, and recording live data both statically and on the road. The unit is powered from the vehicle battery, and connects to the serial diagnostic connector through a 25way D-Type cable system.
POWER CONNECTION
The unit is powered by the vehicle 12 volts battery which is connected to the diagnostic socket. If no power is available through the vehicle diagnostic socket then the adapter cable will have the vehicle battery connections.
VEHICLE CONNECTION
The master cable UVS is used to connect the equipment to the various adapters available for the different vehicle connector types. This system enables the equipment to be kept up to date with the various diagnostic connectors at a reasonable cost.
LCD BACKLIGHT
The LCD BACKLIGHT is automatically switched on when the unit has power. This cannot be switched off or adjusted. If the unit is not used for a period of time the LCD backlight will automatically switch off, and as soon as any key is pressed it will switch back on again.
Get pdf UVS Operating & Applications Manual
