Ford 2008 F250 / F350 Front Bumper Replacement Installation Instructions
Simple step to front bumber replacement:
1) Remove hood release latch from factory assembly on factory bumper. Set aside and retain factory hardware for future installation.
2) Remove 4 bolts beside tow hooks to remove factory bumper. Retain bolts and tow hooks for use in step 7.
3) Remove fog lights from factory bumper retain plastic pins and adjusting screw assembly for future installation.
4) Remove casing from factory fog lights and discard. Install fog lights to brackets located on backside of new bumper using hardware removed in step 2.
5) Lift bumper and align with truck frame and secure with (6) ½”x 2” bolts provided. ( see figure 3)
6) Install bumper support bracket provided to the backside of bumper using (4) ½”x2” bolts provided. ( see figure 4)
7) Adjust bumper and tighten all bolts with 75 lbs of torque.
8) Install tow hook removed in step 2 with original hardware. Plug in wiring harness to fog lights.
9) Install hood release latch removed in step 1 to bracket on new bumper.
Get pdf Ford 2008 F250 / F350 Front Bumper Replacement Installation Instructions
