1999 - 2001 Ford Super Duty Keyless Entry Interface
As delivered by Ford, the factory keyless entry “locks out” when your truck is running. Installing this interface will allow the keyless entry to operate when these conditions are present:
1) Diesel Turbo Lifesaver is running your engine and
2) Ignition key is out of the ignition.
Installation procedure:
1. Install Diesel Turbo Lifesaver first and then install this interface.
2. Find factory fuse box under dash to left of steering column.
3. Remove cover from fuse box.
4. Locate and remove fuse # 19 (10amp), put in glove box for spare.
5. Insert 10 amp fuse with attached wires from Diesel Turbo Lifesaver Interface into fuse slot #19. Please note UP orientation on fuse and that it is delivered intentionally blown from the factory. Failure to observe UP orientation will cause the interface not to work.
6. Attach purple wire of interface to any one of the two purple wires from Diesel Turbo Lifesaver.
7. Secure interface box using supplied screws, cable ties or double stick tape.
8. Using file or wire clippers, cut a notch into fuse box cover to allow clearance for interface wires to enter fuse box (see diagram below).
9. Reinstall cover of fuse box.
Get pdf 1999 - 2001 Ford Super Duty Keyless Entry Interface
