GMC/Chevy Step Bar Assemblies Installation Instructions
STEP 1. Remove the contents from the box and check for any damage. Verify all parts against the parts list.
STEP 2. Read and understand instructions completely before beginning installation.
STEP 3. Bolt mount brackets to vehicle body mounts using metric bolts provided in parts kit. See figure 1.
STEP 4. Position step bar up to the mount brackets and fasten with the 1/2” bolts and washers provided in the parts kit. Secure rear leg of step bar to correct hole location for your vehicle. Tube should not touch vehicle body. See figure 1.
STEP 5. Check to be sure Step Bar is properly aligned with vehicle. Tighten and torque all mounting bracket bolts to 55 FT. LBS.
This kit application for:
1988-99 GM C/K SERIES PICKUP EXT. CAB
1992-00 GM C/K SERIES PICKUP CREW CAB
1997-99 GM C/K SERIES PICK-UP 3 DOOR
1995-99 CHEVY TAHOE 2 DOOR
1988-99 GM C/K SERIES PICK-UP REG. CAB
1992-94 CHEVY BLAZER FULLSIZE 2 DOOR
1992-99 GMC YUKON 2 DOOR
Get pdf GMC/Chevy Step Bar Assemblies Installation Instructions
