Honda Reflex Windscreen Installation/Removal
Tools/Supplies: Phillips screwdriver, windscreen, maybe glue
Step 1 Remove the 2 screws just below the “HONDA” decal on the front cowl (just below the windscreen).
Step 2 Remove the 2 screws on the pillars that connect the sides of the windscreen to the scooter (1 screw on each pillar, screw heads face driver)
Step 3 Remove front cowl from the top and remove the rubber trim and cowl at the same time. Be careful not to damage the tabs.
Step 4 Remove the 6 screws holding the windscreen on. BE CAREFUL! There are grommets and washers that have a tendency to fall into narrow locations if you’re not careful. They are retrievable by removing lower body panels if you do though.
Step 5 For installation of new windscreen, just reverse order. The rubber trim can be temperamental when reinstalling. Some people have had to glue it in to get it to stay, but have patience. It fit before you took it off.
Get pdf Honda Reflex Windscreen Installation/Removal
