Honda Car2PC-HON1 adapter for Car PC & AUX Interface for MP3 player Installation Instructions
Preparation
1. Turn off car engine and remove key from ignition
2. Un-mount your radio from the dash in order to get access to the back side of the radio.
Adapter installation
3. Attach square 14 pins connector to the back of the Honda stereo.
4. Find a place where you can place Car2PC. In many cars there is enough room in the dash to place Car2PC.
Note: Make sure you mount Car2PC in a place with enough room so when you mount the car stereo back you do not break the adapter
5. You may use glove box or other spaces in a dash to direct USB+ Audio cables out
6. Mount your car stereo back into the dash, make sure it‘s clips are securely fastened
7. Now you can turn you car stereo on and switch it over to CD Changer mode. It should show Disk 1, Track 01 on a display.
8. Congratulations! You have installed Car2PC-HON1 adapter and you may use it right away with your PC/laptop
Driver installation
9. Make sure you turn your car stereo on
10. Connect USB cable to your PC/laptop
11. When connected, the PC running Windows 2000 or XP will prompt
12. Insert driver‘s disk into CD drive and click Next
13. When Windows comes up with the message below, just click —Continue Anyway“ button.
Get pdf Honda Car2PC-HON1 adapter for Car PC & AUX Interface for MP3 player Installation Instructions
